Posted On16 Nov 2026

Designing Energy-Efficient Swimming Pools: Lessons from Passivhaus Projects

We've identified key principles that can be applied to almost any project, regardless of budget, scale, or design constraints.

Having worked on several Passivhaus swimming pools and wet leisure facilities, we've identified key principles that can be applied to almost any project, regardless of budget, scale, or design constraints.

1. Plan the Building Layout Carefully

Swimming pool and leisure facilities typically include spaces operating at very different temperatures, from fitness areas and circulation spaces through to warm pool halls.

A well-considered layout that groups spaces of similar temperatures together can help reduce unwanted heat transfer between zones. This not only lowers heating demand but can also help avoid overheating in adjacent areas. Where temperature differences are unavoidable, insulation between spaces can make a significant difference.

2. Keep Filtration Plant Close to the Pool

Pool circulation pumps operate continuously and can represent a significant proportion of a facility's energy use.

Locating filtration equipment close to the pool, ideally at a similar level to the pool tank, reduces pumping power and leads to energy savings for the life of the building.

3. Design Ventilation Around Real Operational Needs

Occupancy levels in leisure facilities can vary considerably throughout the day and week. As a result, mechanical ventilation systems are often oversized or operate longer than necessary.

Be realistic about occupancy, and talk to your designers about how the peak occupancies are influencing design; often the occupancy peaks are infrequent and for short periods. Understanding this means your designers can look at ways good air quality can be achieved with smaller plant.

Alongside careful zoning of the building layout, ventilation systems should also be zoned based on the areas they serve so the ventilation can supply best efficiency.

4. Use Energy Modelling Early

Building energy modelling is often overlooked for swimming pools but is a valuable tool from early-stage.

Including pool systems within energy models has allowed us to find areas with the greatest potential for savings, helping project teams to focus effort where it will have the biggest impact.

5. Pay Close Attention to Pool Hall Ventilation

The way air moves across a pool surface has a major influence on evaporation rates. Because evaporation is one of the largest energy demands in a swimming pool facility, small changes to the ventilation strategy plays a big part in operational performance and running costs. A carefully designed solution can improve comfort, reduce energy use and support long-term building performance.

6. Get the Most from Heat Pumps

Heat pumps are increasingly central to the decarbonisation of all buildings, but their success depends on how efficiently they run – unlike boilers the difference between ‘good’ and ‘poor’ performance can be a doubling in energy. For pool buildings where the demand for heat can be massive it is essential to get this right.

Ask how the heat pumps will perform against each of the demands: pool water, space heating, domestic hot water and air heating all require heating. Often these demands are supplied by a single system which is not always the most cost-effective way.

7. Reduce Distribution Losses

The location of plant and services can have a surprisingly large impact on energy performance. Thoughtful positioning of equipment can reduce heat losses from pipework and ductwork, often avoiding the need for more complex solutions later.

Get plant – specifically ventilation systems – close to the area they are serving and keep duct lengths through areas of different temperatures to an absolute minimum.

Good pool design is simple!

While innovative technologies certainly have their place, many of the biggest opportunities to improve energy performance come from getting the fundamentals right. Decisions about layout, plant location, ventilation strategy and system integration can all deliver lasting benefits for operators, users and budgets alike.

These principals are aimed at new pools, but there are just as many opportunities to improve performance of existing buildings.